![secure erase nvme secure erase nvme](https://i.imgur.com/ZAMJlPq.png)
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.55, changed state to up %LINK-5-CHANGED: Interface FastEthernet0/0.55, changed state to up Router(config-subif)#encapsulation dot1q 30 %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.30, changed state to up %LINK-5-CHANGED: Interface FastEthernet0/0.30, changed state to up Router(config-subif)#encapsulation dot1q 20 %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.20, changed state to up %LINK-5-CHANGED: Interface FastEthernet0/0.20, changed state to up Router(config-subif)#encapsulation dot1q 10 %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0.10, changed state to up %LINK-5-CHANGED: Interface FastEthernet0/0.10, changed state to up
![secure erase nvme secure erase nvme](https://i.imgur.com/F1aRvEj.png)
Sub Interfaces IP address Configure Command: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up %LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up Switch(config-if)#switchport trunk allowed vlan 1,10,20,30,55,77 Switch(config-if)#switchport access vlan 30 Switch(config-if)#switchport access vlan 20 Switch(config-if)#switchport access vlan 10 Switch(config-if)#switchport trunk native vlan 55 Switch(config-if)#switchport trunk allowed vlan 1-1005 %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan77, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down Switch(config-if)#switchport access vlan 77 Management Vlan setup and IP address assign for remote access : VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 End with CNTL/Z.ġ default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 Ip address on interface management vlanĮnter configuration commands, one per line.
#Secure erase nvme how to
Press Secure Erase on the left side panel.I have showed here how to configure Inter vlan router on a stick with all command for switch and router.Open the tool and select the tab for the drive to be erased.The information below is for reference if the tool is already available on your system. The Intel® SSD Toolbox has reached End of Life and is no longer available, please see the following article for more information.Įnd-of-Life (EOL) Announcement for the Intel® SSD Toolbox and Intel® SSD Data Center Tool Applications Option 3: Intel® Solid State Drive Toolbox (Intel® SSD Toolbox)-Run Secure Erase Note Read the warning, Type Y and Press Enter.Type the following: intelmas delete -intelssd # (Note: # is the index number for the drive to be erased).Reference the Index number of the drive to be erased.No need to change directory as the commands are global)
#Secure erase nvme windows
Type the following: intelmas show -intelssd (Images in the following steps are from Windows as an example.
![secure erase nvme secure erase nvme](https://techgage.com/wp-content/uploads/2013/07/Performing-a-Secure-Erase-SSD-Under-Linux-500x297.png)
#Secure erase nvme install
![secure erase nvme secure erase nvme](https://i.ytimg.com/vi/AhwxmJeBO8k/maxresdefault.jpg)
Read the warning message and press the Yes button.Hover over the Select a Feature menu and press Secure Erase.Open the tool and select the drive to be erased in the left side panel.No partitions on the drive. ( Removing Partitions with Microsoft DiskPart*)Ĭlick or the topic for details: Option 1: Intel® Memory and Storage GUI Tool-Run Secure Erase.NVMe devices supported on all tool supported operating systems.SATA devices supported on Windows 7* only, later operating system versions block this capability.The Secure Erase functionality is compatible on the following operating systems: Learn below how to run a Secure Erase (or low level format) on supported Intel® SSDs